UV Adhesives

MAXWELD® UV adhesives are an advanced range of solvent-free adhesives for very strong bonding of glass and metals. UV adhesives are transparent clear with different structure from hard to elastic elastomers. UV adhesives are in a single-component form with different viscosities of water-like viscosity to the non-dripping gel. UV adhesives enable the reposition of glued components without time limit until they are exposed to ultraviolet light, which causes the liquid acrylic glue to harden in a few seconds and forms a very durable polymer for joining materials.

UV Adhesives for Glass & Metals

MC-2321
MAXWELD® UVG-100
UV glue, Low viscosity, wicking type. Low bubble formation with excellent flow. Multi-purposeGlass-Glass, Metal, Plastics
Viscosity @ 25°C cps
80 - 120
Color
Clear
Refractive Index
1.509
Lap Shear Strength
3,450 psi
23.8 Mpa
Hardness
70D
MC-2322
MAXWELD® UVG-400
UV glue, Ideal for decorative or structural glass bonding. Glass-Metal, Glass, Metals
Viscosity @ 25°C cps
300 - 500
Color
Clear
Refractive Index
1.495
Lap Shear Strength
3,750 psi
25.8 Mpa
Hardness
68D

UV curable adhesives for Plastics

MC-2341
MAXWELD® UVP-60
UV glue, Plastic Windows bonding and sealing. Appliance and Plastic assembly. High strength plastic bonding. UV/Visible curable. PMMA, PVC, PC, ABS, PET, Acrylics, PETG, Styrene, PS, PEEK, Nylon, Composites, FRP, POLIAMID, PV Alloys, Steel
Viscosity @ 25°C cps
50 - 70
Color
Clear
Refractive Index
1.3%
Lap Shear Strength
23%
Shore Hardness
65D
MC-2344
MAXWELD® UVP-6K
UV glue, Display assembly. Aerospace/Automotive assembly. Electrical potting. PMMA, PC, PETG, Glass
Viscosity @ 25°C cps
5000 - 7500
Color
Clear
Refractive Index
1,20%
Lap Shear Strength
45%
Shore Hardness
68D

UV curable adhesives for Optical Assembly

MC-2351
MAXWELD® UVO-1K
UV glue, Multi-care, UV/Heat activator. Suitable where light will not reach. Multi-purpose optical adhesive. Glass, Metals
Viscosity @ 25°C cps
1000 - 1500
Color
Clear
Refractive Index
1.507
Shear Strength
2900 psi
20 Mpa
Hardness
75D
MC-2352
MAXWELD® UVO-11K
UV glue, Low out-gassing for alignment stability. Excellent strength. Glass, Metals
Viscosity @ 25°C cps
10000 - 12500
Color
Clear
Refractive Index
1.497
Shear Strength
2500 psi
17.2 Mpa
Hardness
75D

UV curable adhesives for Windshield Repair

MC-2361
MAXWELD® UVW-10
UV glue, Low viscosity, wicking grade that penetrates to fill small hair line cracks. Glass
Viscosity @ 25°C cps
6 - 10
Color
Clear
Refractive Index
1.51
Shear Strength
2000 psi
13.8 Mpa
Shore Hardness
75D
MC-2362
MAXWELD® UVW-20
UV glue, Low viscosity resin used for Star, bull`s eye repair as well as small hair line cracks. Glass
Viscosity @ 25°C cps
18 - 22
Color
Clear
Refractive Index
1.52
Shear Strength
2650 psi
18.3 Mpa
Shore Hardness
75D
MC-2363
MAXWELD® UVW-40
UV glue, Medium viscosity used for long crack, star and bull`s eye repair. Glass
Viscosity @ 25°C cps
38 - 45
Color
Clear
Refractive Index
1.52
Shear Strength
2800 psi
19.3 Mpa
Shore Hardness
74D
MC-2364
MAXWELD® UVW-1K
UV glue, High viscosity resin ideally designed as pit filler. Glass
Viscosity @ 25°C cps
900 - 1100
Color
Clear
Refractive Index
1.505
Shear Strength
3400 psi
23.4 Mpa
Shore Hardness
80D

UV curable adhesives for Medical Devices

MC-2371
MAXWELD® UVM-600
UV glue, Specifically designed for bonding hypodermic needles into hubs. Excellent adhesion to thermoplastic and steel. Plastics, Steel
Viscosity @ 25°C cps
500 - 700
Color
Clear
Linear Shrinkage
1.2%
Elongation
26%
Shore Hardness
77D
MC-2372
MAXWELD® UVM-5K
UV glue, Suitable for intravenous tube sets, oxygenerators, reservoirs, diagnostics electronics, etc. Excellent adhesion to polycarbonates and rigid PVC. PC, PVC, PUR, PS, PETG, ABS
Viscosity @ 25°C cps
4000 - 6000
Color
Clear
Linear Shrinkage
1.0%
Elongation
42%
Shore Hardness
60D
MC-2373
MAXWELD® UVM-1K
UV glue, Suitable for face masks, tube sets & fittings, breathing circuits, resuscitator bags, etc. PC, PVC, PUR, PS, PETG, ABS
Viscosity @ 25°C cps
1000 - 1500
Color
Clear
Linear Shrinkage
1.2%
Elongation
23%
Shore Hardness
63D
MC-2374
MAXWELD® UVM-150
Highly plasticized PVC, PC, PU, PS, PETG
Viscosity @ 25°C cps
100 - 200
Color
Clear
Linear Shrinkage
1.1%
Elongation
28%
Shore Hardness
65D

UV curable adhesives for Electronic Assembly

MC-2380
MAXWELD® UVE-18K
UV glue, High viscosity encapsulant for precision application to specific electronic assembly areas, glob top application. Metal, Plastics, Ferrite
Viscosity @ 25°C cps
17000 - 20000
Tensile Strength
1000 psi
6.9 Mpa
Cure Mechanism
UV, Visible, Heat
Elongation
90%
Shore Hardness
45D
MC-2381
MAXWELD® UVE-700
Metal, Plastics, FerriteUV glue, Specifically designed for potting. Bonds with slight adhesion: for connectors, thermal switches, temper proofing.
Viscosity @ 25°C cps
600 - 800
Tensile Strength
750 psi
5.2 Mpa
Mechanism wiązania
UV, Visible, Heat
Elongation
72%
Shore Hardness
55D
MC-2382
MAXWELD® UVE-200
UV glue, Tough, glossy conformal coating with excellent adhesion to wide variety of boards and masks. Fast cure. Metals, Ceramic, Glass-filled epoxy
Viscosity @ 25°C cps
150 - 200
Tensile Strength
500 psi
3.5 Mpa
Mechanism wiązania
UV, Visible, Heat
Elongation
12%
Shore Hardness
85D
MC-2383
MAXWELD® UVE-50K
UV glue, Potting, encapsulating, bonding of electronic parts. Plastics, Glass, Metals
Viscosity @ 25°C cps
40000 - 60000
Tensile Strength
1200 psi
8.3 Mpa
Mechanism wiązania
UV, Visible
Elongation
48%
Shore Hardness
52D

UV Conformal Coatings for Protection of Electornic Circuit Boards

MC-2382
MAXWELD® UVE-200
UV glue, Tough, glossy conformal coating with excellent adhesion to variety of PC boars and masks. Multi-cure with fast speed. PCB Boards, Glass-filled epoxy, Ceramic, Metals
Viscosity @ 25°C cps
150 - 200
Modulus of Elasticity psi
60000 - 70000
Dielectric Strength volts/mil
1700 - 1900
Elongation
Shore Hardness
D80 - D85
MC-2384
MAXWELD® UVE-2K
UV glue, Medium viscosity; Multi-cure coating for wetting components, low modulus for enhanced thermal cycling performance. Glass-filled epoxy, PCB boards, Metals
Viscosity @ 25°C cps
2200 - 2500
Modulus of Elasticity psi
12000 - 15000
Dielectric Strength volts/mil
> 1500
Elongation
Shore Hardness
D60 - D65

UV Chip Encapsulants & Wire bonders

MC-2385
MAXWELD® UVE-5K
UV glue, Ideal for Chip on Board, Chip on Flex, Chip on Glass, Wire bonding, Bare-die encapsulation. PET, Polyimide, Metals
Viscosity @ 25°C cps
4000 - 5000
Modulus of Elasticity psi
2500 - 3000
Elongation przy zerwaniu %
140 - 160
Shore Hardness
D45 - D50
Color
Clear
MC-2386
MAXWELD® UVE-17K
UV glue, Higher viscosity version of Parlite 4713. Low modulus for wire bonding application. PET, Polyimide, Metals, Glass
Viscosity @ 25°C cps
15000 - 20000
Modulus of Elasticity psi
2500 - 3000
Elongation przy zerwaniu %
140 - 160
Shore Hardness
D45 - D50
Color
Clear

UV curable adhesives for Display Bonding & Laminating

MC-2387
MAXWELD® UVE-11K
UV glue, LCD End-sealing, Bonding frame to disyplay surface, Bonding components. Glass, LCD, Plastics
Viscosity @ 25°C cps
10000 - 12000 cps
Refractive Index
1.507
Lap Shear Strength
1200 psi
8.3 Mpa
Shore Hardness
60D - 62D
Color
Clear
MC-2388
MAXWELD® UVE-1K
UV glue, Optical display lamination. Touch screen assembly. Glass, LCD, Plastics
Viscosity @ 25°C cps
900 - 1100 cps
Refractive Index
1.497
Lap Shear Strength
900 psi
6.2 Mpa
Shore Hardness
68D - 70D
Color
Clear

UV curable adhesives for Micro-Speaker Assembly Adhesives

MC-2390
MAXWELD® UVE-500
UV glue, Speaker assembly, plastic housing assembly, flexible plastic lamination, appliance assembly. Plastics
Viscosity @ 25°C cps
400 - 500
Lap Shear Strength
2500 psi
17.2 MPa
Elongation %
85 - 95
Shore Hardness
54D - 58D
Color
Clear
MC-2391
MAXWELD® UVE-45K
UV glue, Micro-speaker membranes to housings, LCP bonding. Plastics
Viscosity @ 25°C cps
40000 - 50000
Lap Shear Strength
2200 psi
15.2 MPa
Elongation %
70 - 80
Shore Hardness
54D - 56D
Color
Clear
MC-2392
MAXWELD® UVE-70K
UV glue, Wire-Fixing, Contact sealing, Bonding coil to membrane in speaker assembly. Metals, Plastics
Viscosity @ 25°C cps
60000 - 80000
Lap Shear Strength
2300
15.8 MPa
Elongation %
110 - 120
Shore Hardness
50D - 52D
Color
Red

UV curable adhesives for Smart Card, Dam & Fill Encapsulant

MC-2393
MAXWELD® UVE-5K
UV glue, Speaker assembly, plastic housing assembly, flexible plastic lamination, appliance assembly. Plastics
Viscosity @ 25°C cps
4500 - 5200 cps
Szkurcz objętościowy
2 - 3 %
Elongation %
5 - 8 %
Shore Hardness
78D - 80D
Color
Clear
MC-2394
MAXWELD® UVE-170K
UV glue, Encapsulant for smart card technology. Dam for Dam & Fill. Plastics
Viscosity @ 25°C cps
160000 - 190000 cps
Szkurcz objętościowy
2 - 3 %
Elongation %
18 - 22 %
Shore Hardness
60D - 62D
Color
Clear