Instant Cyanocrylate Adhesives

This comprehensive range of cyanoacrylates contains Ethyl, Methyl and Butyl based products, which essentially bond a huge array of different substrates.
Although we don`t manufacture the bases ourselves (few people really do), we do blend and modifiy the different bases to attain the best possible performance from our products.
The base monomers we use are of European origin and endure a rigorous quality approval system before they are accepted into our range.
What is a Cyanoacrylate?
A cyanoacrylate is a single part adhesive which, when pressed between two surfaces, will react and form a rigid thermoplastic, thus bonding the two materials together. Cyanoacrylates will adhere to a huge range of different substrates and are available in many different thicknesses, ranging from a thin liquid, up to a thick paste or gel.
"How do they work?
Cyanoacrylate adhesives are normally made from a base ester or chemical compound, which in its pure state will react and polymerize when in contact with water or moisture. As there is moisture and water in the air we need to control this reaction by making the ester only react when we want it to. We do this by adding a weak acid which stabilizes and prevents polymerization. However, when the adhesive comes into contact with a surface, any moisture or water present on the surface will neutralize the acidic stabilizer. Once the stabilizer is neutralized the cyanoacrylate ester is free to polymerize and curing begins.

MC-2120
BC20
Wicking grade cyanoacrylate instant adhesive for bonding metals, rubbers, plastics post assembly.
Size
20g, 25g, 50g 500g
Base
Ethyl Monomer
Colour
Transparent
Approx Viscosity [cPA]
3
Max Gap Fill [mm]
0.1
Temperature Range [˚C]
-60 ÷ 90
Fixture Time [secs]
5
MC-2141
BC41
Multi-purpose CA adhesive for insensitive surfaces, plastics, rubbers, metals. Medium viscosity.
Size
20g, 25g, 50g, 500g
Base
Ethyl
Colour
Transparent
Approx Viscosity [cPA]
110
Max Gap Fill [mm]
0.15
Temperature Range [˚C]
-60 ÷ 100
Fixture Time [secs]
15
MC-2160
BC60
Low viscosity, Ca adhesive for rubbers, difficult to bond materials, insensitive surgfaces. Low viscosity.
Size
20g, 25g, 50g, 500g
Base
Ethyl
Colour
Transparent
Approx Viscosity [cPA]
20
Max Gap Fill [mm]
0.1
Temperature Range [˚C]
-60 ÷ 100
Fixture Time [secs]
15
MC-2144
BC44
High viscosity Gel CA adhesive for insensitive urfaces, porous materials, wood, plastics, metals. Does not leak from vertical surfaces.
Size
20g, 300g
Base
Ethyl
Colour
Transparent
Approx Viscosity [cPA]
żel
Max Gap Fill [mm]
0.5
Temperature Range [˚C]
-60 ÷ 100
Fixture Time [secs]
30
MC-2180
BC80
Black, Rubber toughened CA adhesive, more flexible and more shock resistant. Recommended for rubbers, metals, plastic, glass, flexible materials.
Size
20g, 25g, 50g, 500g
Base
Ethyl
Colour
Black
Approx Viscosity [cPA]
300
Max Gap Fill [mm]
0.1
Temperature Range [˚C]
-60 ÷ 100
Fixture Time [secs]
N/A
MC-2710
PR07
Primer for poliolefines, PP, PE, PTFE and diificult to bond materials. Used before bonding.
Size
30ml, 1l
Base
Colour
Transparent
Approx Viscosity [cPA]
3
Max Gap Fill [mm]
Temperature Range [˚C]
Fixture Time [secs]
60